================================================================================
                    INFORMATION REGARDING TOSHIBA PRINTERS
================================================================================

You have selected one of the following printers:

   Toshiba P351SX       Toshiba P341e        Toshiba P321SLC
   Toshiba P351C        Toshiba P341         Toshiba P1350
   Toshiba P351         Toshiba P321SL       Toshiba P1351
   Toshiba P341SL       Toshiba P321         Toshiba P1340

Your printer has been installed; however, it has not yet been
configured properly.  To properly configure your printer, use
the Control  Panel.   For information on how to do this,  see
"Configuring Your System" in Chapter 7, "Using Control Panel",
of the Microsoft Windows User's Guide. Be sure to properly set
up your communications port.

The Toshiba Dot Matrix driver;

    -  supports 12 printer models
    -  supports four resolutions
    -  dithers and mixes colors

You can install the Toshiba driver as a through the Windows Setup 
program or the Control Panel.  For more information on installing 
a printer, see the section "Adding a New Printer" in the chapter 
"Using the Control Panel" in the Windows User's Guide.  Note, the 
file TOSH24.FIF is not installed by the Control Panel. If you use 
downloadable or card fonts, you must copy this file into the same 
directory where you installed the driver.

Note: To ensure higher quality output, turn on the "3 Pass
Graph" option, available on certain models. For more
information, see the Toshiba User's Manual or contact Toshiba.

USING THE MENUS


Model Menu: Choosing a printer

When you select a model, the driver sets the options to the
defaults for that printer model. A check mark reflects the
latest choice made in the Model menu and the printer name
appears in the title bar. 


Paper Menu: Select paper size

The Paper menu lets you conveniently select paper size, and
lets you switch between English and metric units.

The Toshiba printer driver supports 9 standard paper sizes and
2 standard envelope sizes:

-  Letter (8.5 x 11 in.)
-  Legal  (8.5 x 14 in.)
-  Ledger (11 x 17 in.)
-  Statement (5.5 x 8.5 in.)
-  A5 (148 x 210 mm)
-  A4 (210 x 297 mm)
-  A3 (297 x 420 mm)
-  B5 (182 x 257 mm)
-  B4 (257 x 364 mm)
-  Envelope (3.5 x 6.5 in.)
-  Envelope (4.0 x 9.5 in.)

All paper sizes are available for each device. The Page area
reflects the selected paper size. 


Quality Menu: Choosing a Resolution

The Quality menu lists the resolution options the Toshiba
printer driver supports. They include:

-  180(V) x 180(H) dpi
-  180(V) x 360(H) dpi
-  360(V) x 180(H) dpi
-  360(V) x 360(H) dpi

The resolutions available depend on the selected model.


Foreground Menu: Choosing Colors

The Foreground menu lists the available printer ribbon 
colors.  The Foreground menu is only available when you 
choose monochrome print type with models that support 
color.


Options Menu: Choosing Fonts

The Options menu lets you choose resident, card, downloadable, 
and cartridge fonts.  The font options available depend on 
the selected model.

When you choose one of the fonts commands, a dialog box appears. 
The Resident Fonts dialog box displays the fonts available on
the selected device. You can leave the highlighted fonts
selected, or you can choose an individual font. Then choose Ok
to implement your choice or Cancel to return to the main dialog
box.

The Card Fonts dialog box displays two card positions, and the
available card fonts. Choose a card slot (either A or B), then
choose a font. Choose Ok to implement your choice, or Cancel to
return to the main dialog box.

Note: For more information about card fonts, see the Toshiba
User's Manual or contact Toshiba.

The Downloadable Fonts dialog box displays two font positions
(1 and 2), and the available fonts. You can select only two
downloadable fonts. Choose the drive and directory where the
downloadable fonts are installed, and then choose Ok to display
the fonts. Choose a font position and choose the font to
download. If you want to save the current path as the default,
choose the Save option. Then choose Ok.

Downloadable fonts are downloaded to the printer when needed.
After the fonts are downloaded, the Download check box is
"unchecked" so the fonts are not repeatedly downloaded for each
document printed. If the printer is turned off, recheck the
Download check box to reload the selected downloadable fonts.

If text in a document uses a downloadable font that is not
selected in the Downloadable Fonts dialog box, the font is
automatically downloaded when the document is printed, provided
one of the two font positions is vacant. If a downloadable font
position is not available, the text is printed using the
closest available device font. For more information about
downloadable fonts, see the Toshiba User's Manual or contact
Toshiba.

Note: For models with configurable RAM, these are the
configuration settings: RAM ALOC=DLL, and Buffer Size=2K. For
more information, see the Toshiba User's Manual or contact
Toshiba.

The Cartridge Fonts dialog box displays the fonts available on
cartridge. You must select the name of the cartridge currently
in the printer, then choose Ok to implement your choice, or
Cancel to return to the main dialog box.

You can select either the USA or IBM 2 character set in the
Options menu, if your model supports it. Selecting the IBM 2
character set allows you to access more European characters
than are available in the standard USA character set. The IBM 2
character set has decimal codes above 127. You enter a code in
the Windows application by pressing alt and typing the decimal
code on the numeric keypad. See the Toshiba printer manual for
a listing of the IBM 2 character set.

Note: Make sure the printer setting matches the setting in the
Options menu.


CHOOSING OPTIONS

Page:

You can choose portrait or landscape orientation. In portrait
mode, the page is printed with the same orientation as the
image displayed on the screen. In landscape mode, the page is
printed with the image rotated 90 degrees clockwise.

The Toshiba printer driver supports widths from 1 to 13.5
inches for wide carriages, and widths from 1 to 8.5 inches for
narrow carriages. It also supports heights from 1 to 88 inches.
Use the scroll arrows in the Page option box, or type a new
number in the text box, to change the page width or height.

Note: Page width is restricted to 10 inches in color mode at a
resolution of 360(V) x 360(H) dpi.  You can change to the Metric 
option by choosing one of the five Metric sizes in the Paper menu.

The Auto Form Feed option causes a form feed command to be
issued to the printer after each page.


Print:

The print modes are color and monochrome.  The print modes 
available depend on the selected model. The monochrome option 
lets you choose the printer ribbon color if the model chosen 
supports color output. The color option lets you print text and 
graphics as displayed on a color monitor.  If a model does not 
support color printing, the color option is disabled.


Paper Source:

The Paper Source list box displays the available methods for
loading paper. The available paper sources depend on the
selected device. Use the scroll arrows to scroll through the
available paper sources. Highlight the source you want to use.


Solid Fills:

The Solid Fills option allows you to select the density of
solid fills. When you choose the darkest option (Dark), solid
fills print approximately four times as dark as the lightest
option (Pale). The default is Light.

Note: Dark is not available at a resolution of 180(V) x 180(H)
dpi.

After you choose all the options you want, you can 

Choose           To
---------        -----------------------------------------------

Ok               implement your choices and close the dialog
                 box

Reset            cancel your choices and revert to the values
                 last saved or the default values

Cancel           close the dialog box without implementing any
                 options

Save             save your options as the new defaults
================================================================================
                              END OF READMETO.TXT
================================================================================
